Holden V8 PCV Valve + Breather + Filter Kit HQ HJ HX HZ WB LH-UC VB VC VH VK VL

This is a specifically made V8 PCV Valve, Breather & Elbow kit comes complete with:

• PCV Valve
• PCV Grommet
• Breather filter
• Filter Retaining clip

Elbow grommet to suit your:

• Holden HQ, HJ, HX, HZ, WB.
• Torana LH, LX, UC
• Commodore VB VC VH VK VL 

Note - 6cyl and V8s have different PCV valves with different spec internal weighting. To get your motor breathing properly you need the right PCV value to suit your motor.

The Positive Crankcase Ventilation valve system is one of the oldest emission control devices, and also one of the most beneficial.

The PCV valve is an emissions control device that routes unburned crankcase blow-by gases back into the intake manifold where they can be re burnt. This eliminates crankcase emissions as a source of air pollution, plus the constant recirculation of air through the crankcase helps remove moisture which causes sludge to form.

A carboned up or leaking PCV Valve can also cause oil burning and poor running by allowing the wrong airflow for the throttle setting.

A properly operating PCV valve will extend the life of the oil and engine. The valve and filter should be replaced somewhere around 30,000 to 50,000 miles (see the vehicle owners manual for service intervals).

If you are after more we also have listed for both 6cyl & V8s - PCV valves, the tricky little breather filter that mounts onto the air cleaner, crankcase breather elbows, grommets and full kits including the breather hose.

Thanks for looking and don't forget to check out all of our Restoration Essentials in our store.
Your parcel will have a unique tracking number which will be sent to you via email on dispatch so you can keep an eye on your delivery.