Holden Guard Front Eyebrow Moulding LEFT + Clips HK HT HG chrome trim fender

You are looking at a Holden Guard Front Eyebrow Kit to suit;

• Left Hand (passenger side)
• HK HT HG
• Belmont Kingswood Premier Brougham Monaro
• This kit has 1x Left guard moulding plus 4x rivets and 4x clips

TO FIT
1 # fit the rivets to the guards first size the rivet before drilling, make sure that the holes are clear then use a pop rivet gun to the apply the rivets into the panels, fit the clips to the rivets by placing the clip over the head of the rivet then push the clip sideways to lock the clip to the rivet.
2 # push the end clips, flat side to the bonnet into the bonnet moulding; use the bonnet to line the clips to the holes in the bonnet before fitting the moulding to the bonnet.
3 # where possible hook the moulding under the edge of the clips, then push the moulding over the clips so that the moulding sits against the panel, then fit the washers and screws to bonnet moulding tighten until the screw head just touches the washer against the bonnet.

Thanks for looking and don't forget to check out all of our Restoration Essentials in our store.

All postal deliveries are sent via Aust Post eParcel. Your parcel will have a unique tracking number which will be sent to you via email on dispatch so you can keep an eye on your delivery.